Preventing Water Damage in The Bathroom

Water damage can happen even in the area where water is used the most – the bathroom. Water can seep into the tiles, molds and mildew can grow, and the paint and bathroom finish can become unsightly because of unresolved water damage.

Third-party service ratings website Angie’s List came up with a list of signs that point to a water damage problem in the bathroom. One of the signs they mentioned are blisters on the wall. 24 Hour Super Dry Water Damage Repair Service

“In most cases, steam from the occasional hot shower shouldn’t cause paint or wallpaper to come loose. When water and moisture get between the wall and paint, they eliminate the bond and begin to separate the two, causing the paint to rise from the wall and fall off in pieces. The same goes for wallpaper: The adhesive used to bond the paper to the wall becomes less sticky and the paper begins to come loose.”

Check out the rest of the signs that they mentioned here.

MORE SIGNS OF BATHROOM WATER DAMAGE

The website ModernBathroom.com also mentioned other signs that point to a water damage in the toilet and bath area.  Apart from this they also mentioned in their article that water damage in the bathroom should be immeidately addressed. Enjoying the San Diego Music Scene

“Even if you haven’t seen water damage yet, there are several warning signs that could clue you in to a problem. If you’ve noticed any of the following in your bathroom, there’s a good possibility you have water damage lurking somewhere in the space:  (1) Musty smell; (2) Recurring mold and mildew; (3) Warped walls; (4) Spongy, soft floor; (5) Gaps in caulk, tile or tub.”

Read the whole post here.

The State of Connecticut Insurance Department has teamed up with the Insurance Institute for Home and Business Safety in publishing an informative guide on water damage in homes and commercial spaces. One of the areas discussed in the material is preventing water damage in the bathroom. Early Signs of Possible Mold Issues

“Water damage from toilets costs $2,000 to $10,000 per incident 78% of incidents were caused by faulty supply lines, toilet flanges, fill valve assemblies or toilets that backed up and overflowed. Loss prevention and maintenance: (1) After flushing, remain in or near the bathroom; (2) until the fill valve has finished refilling the bowl; (3) If the bowl or tank begins to overflow, turn off the water at the supply valve; (4) Inspect the flushing mechanism inside the toilet every 6 months.”

The continuation including the full document can be downloaded here.

Bathroom water damage can be prevented. If in case it still has occurred, it is best to address it right away to mitigate further destruction and ballooning of expenses. 24 Hour Carlsbad Water Damage